Como encontrar servidores DHCP con Nmap

miércoles, diciembre 30, 2015 Publicado por: Oscar Meza


Para escanear una red en busca de servidores de DHCP a través del comando Nmap utilizamos el siguiente comando.

sudo nmap -sU -p 67 --script=dhcp-discover 192.168.1.0/24

En este caso estoy escaneando la red 192.168.1.0 con mascara de 24 bits, el resultado fue el siguiente, donde solo se encontro la ip 192.168.1.1 como servidor de DHCP.

Starting Nmap 6.40 ( http://nmap.org ) at 2015-12-28 22:41 CST
Nmap scan report for speedtouch.lan (192.168.1.1)
Host is up (0.0076s latency).
PORT   STATE         SERVICE
67/udp open|filtered dhcps
MAC Address: 00:24:17:B6:F6:26 (Thomson Telecom Belgium)

Nmap scan report for Chromecast.lan (192.168.1.4)
Host is up (0.23s latency).
PORT   STATE  SERVICE
67/udp closed dhcps
MAC Address: A4:77:33:00:CB:C9 (Unknown)

Nmap scan report for android-15f298e1d459a581.lan (192.168.1.5)
Host is up (0.36s latency).
PORT   STATE  SERVICE
67/udp closed dhcps
MAC Address: EC:1F:72:D9:F6:8C (Unknown)

Nmap scan report for android-c71732d9c21c46cb.lan (192.168.1.10)
Host is up (0.23s latency).
PORT   STATE  SERVICE
67/udp closed dhcps
MAC Address: 20:02:AF:CB:D8:1A (Murata Manufactuaring Co.)

Nmap scan report for speedtouch.lan (192.168.1.254)
Host is up (0.24s latency).
PORT   STATE SERVICE
67/udp open  dhcps
| dhcp-discover: 
|   DHCP Message Type: DHCPACK
|   Server Identifier: 192.168.1.1
|   Subnet Mask: 255.255.255.0
|   Domain Name Server: 192.168.1.1
|   Domain Name: lan
|_  Router: 192.168.1.1
MAC Address: 00:24:17:B6:F6:26 (Thomson Telecom Belgium)

Nmap scan report for mint1.lan (192.168.1.14)
Host is up (0.00013s latency).
PORT   STATE  SERVICE
67/udp closed dhcps

Nmap done: 256 IP addresses (6 hosts up) scanned in 19.62 seconds

0 comentarios: